| P3100 Hydraulic Deadweight Testers |
| |
|
| |
 |
The P3100 Models are available in single or dual piston formats for increased operating ranges. Units can be supplied in psi, bar, kgf/cm², and MPa. These robust instruments are highly accurate, quick and easy to use. Units feature a built-in priming pump for large volume applications, piston flotation indicators and a high quality screw press for fine pressure control
- -Pressure ranges to 60,000 psi (4000 bar)
- -0.015% of reading accuracy standard (0.008% optional)
- -Single or dual piston formats
- -Built-in hand pumps standard
- -Mounted spirit level with adjustable feet
- -Units can be trimmed to local gravity FOC
|
| |
Pressure Ranges |
| Oil operated |
Ranges to 20,000 psi (1400 bar) |
|
| |
Accuracy |
| Accuracy* |
±0.015% of reading (±0.008% optional) |
| *Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range. |
|
| |
Materials of Construction |
| Standard weight material |
Series 3 non-magnetic austenitic stainless steel |
| Weight density |
7.8 g/cm³ |
| Optional fractional weights |
Solution heat treated aluminum |
| Weight density |
2.7 g/cm³ |
| Piston material |
Tungsten carbide with nickel binder
Density- 15.0 g/cm³ |
| Cylinder material |
Hardened martensitic steel
Tungsten carbide (water above 500 psi, 35 bar) |
| Thermal coefficients of expansion |
Oil piston/cylinder 16.5 ppm/°C
Water (above 500 psi, 35 bar) 11 ppm/°C |
|
| |
General |
| Test port adaptors |
1/8, 1/4, 3/8 and ½ NPT or BSP |
| Instrument weight |
36 lbs (16 kg) |
| Instrument size |
17.5 W x 12 D x 8.5 H |
| Mass set weight (typical) |
80 lbs (36 kg) |
| Reservoir volume |
150 cc |
| Screw press displacement |
5.5 cc |
| Pump displacement |
4.7 cc per stroke |
| O-ring seal materials |
Buna N as standard, Viton and EPDM available |
|
| |
Weight Increments |
| Minimum Standard Weight Increments |
Up to 500 psi (35 bar): 1 psi (0.1 bar)
500 to 5000 psi (35 to 350 bar): 10 psi (1 bar)
5000 to 20,000 psi (350 to 1400 bar): 20 psi (2 bar)
Model P3112: 1 psi (0.1 bar) |
| Optional Fractional Weights |
Up to 500 psi (35 bar): 0.1 psi (0.01 bar)
500 to 5000 psi (35 to 350 bar): 1 psi (0.1 bar)
5000 to 20,000 psi (350 to 1400 bar): 2 psi (0.2 bar) |
|
| |
Operating Fluid |
| Mineral oil |
Shell spindle oil 22, our reference 55-655, viscosity 40 cs@ 20°C |
|
| |
Options |
| PressCal Software |
Windows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments. |
| Fluids |
Instruments can be supplied for use with Skydrol or brake fluids. Due to the aggressive nature of these fluids the standard nitrile seals and the acrylic reservoir tube will be replaced by either Viton or EPDM seals (as applicable) and an aluminum reservoir tube. For these or any other specialty fluid applications, please consult the factory. |
|
