(주)티앤씨

본문 바로가기


거리측정기
멀티미터
범용 계측기
스코프 미터
시간 및 주파수 교정기
     
실내 공기 측정기
압력분야 교정기
열화상 카메라
온도미터
온도분야 교정기
       
전기분야 교정기
전기 측정 측정기
전력 분석기
절연저항 측정기
접지저항 측정기
       
클램프미터(후크미터)
프로세스 캘리브레이터
Accessary
   


DHI : Flow DHI : Pressure DHI : Software Pressurements Ruska Software
 
5521 and 5522 Liquid to Liquid Separators
P3000 Pneumatic Deadweight Testers
P3100 Hydraulic Deadweight Testers
P3200 Hydraulic Deadweight Tester
P3800 Series High Pressure Hydraulic Deadweight
P5510 Pneumatic Comparison Test Pump
P5513 Pneumatic Comparison Test Pump
P5514 Comparison Test Pumps
P5515 Comparison Test Pumps
P5523 Liquid to Gas Media Separator
P5531 Dirt/Moisture Trap
P5532 Dirt/Moisture Trap
P5543 Angle Adapter
P5544 Two Gauge Stand
   
P3200 Hydraulic Deadweight Tester
 

 

 

The P3200 Models are available in single or dual piston formats for increased operating ranges. Units can be supplied in psi, bar, kgf/cm², and MPa. These robust instruments are highly accurate, quick and easy to use. Units feature a built-in priming pump for large volume applications, piston flotation indicators and a high quality screw press for fine pressure control.

 

Options

PressCal software for pressure calculations and certificate generation

  • -Pressure ranges to 10,000 psi (700 bar)
  • -0.015% of reading accuracy standard (0.008% optional)
  • -Single or dual piston formats
  • -Built-in hand pumps standard
  • -Mounted spirit level with adjustable feet
  • -Units can be trimmed to local gravity FOC


Pressure Ranges

Distilled water operated Ranges to 10,000 psi (700 bar)
 

Accuracy

Accuracy ±0.015% of reading (±0.008% optional)

*Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.
 

Materials of Construction

Standard weight material Series 3 non-magnetic austenitic stainless steel
Weight density 7.8 g/cm³
Optional fractional weights Solution heat treated aluminum
Weight density 2.7 g/cm³
Piston material Tungsten carbide with nickel binder
Density- 15.0 g/cm³
Cylinder material Hardened martensitic steel
Tungsten carbide (water above 500 psi, 35 bar)
Thermal coefficients of expansion Oil piston/cylinder 16.5 ppm/°C
Water (above 500 psi, 35 bar) 11 ppm/°C
 

General

Test port adaptors 1/8, 1/4, 3/8 and 1/2
NPT or BSP
Instrument weight 36 lbs (16 kg)
Instrument size (W x D x H) 17.5 in x 12 in x 8.5 in (440 mm x 300 mm x 215 mm)
Mass set weight (typical) 80 lbs (36 kg)
Reservoir volume 150 cc
Screw press displacement 5.5 cc
Pump displacement 4.7 cc per stroke
O-ring seal materials Buna N as standard, Viton and EPDM available
 

Weight Increments

Minimum Standard Weight Increments Up to 500 psi (35 bar): 1 psi (0.1 bar)
500 to 5000 psi (35 to 350 bar): 10 psi (1 bar)
5000 to 20,000 psi (350 to 1400 bar): 20 psi (2 bar)
Model P3112: 1 psi (0.1 bar)
Optional Fractional Weights Up to 500 psi (35 bar): 0.1 psi (0.01 bar)
500 to 5000 psi (35 to 350 bar): 1 psi (0.1 bar)
5000 to 20,000 psi (350 to 1400 bar): 2 psi (0.2 bar)
 

Operating Fluids

Operating Fluids Distilled or deionized water
 

Options

PressCal Software Windows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments
Fluids Instruments can be supplied for use with Skydrol or brake fluids. Due to the aggressive nature of these fluids the standard nitrile seals and the acrylic reservoir tube will be replaced by either Viton or EPDM seals (as applicable) and an aluminum reservoir tube. For these or any other specialty fluid applications, please consult the factory.
 



회사소개 제품소개 견적및데모요청

법인명 : 주식회사 티앤씨  경기도 광명시 하안로 60, 광명SK테크노파크 A동 808호  사업자등록번호 108-81-96584  대표이사 : 김용정
  전화: 02-2635-6859   팩스: 02-6008-3672   이메일: info@tandc.co.kr

COPYRIGHT(C) 2014 TNC.ALLRIGHT RESERVED.

상단으로