 |
| 2413 DPI Cell |
| |
|
| |
 |
The differential pressure cell has two pressure chambers separated by a thin metal diaphragm. A difference in pressure in the two chambers causes a deflection of the diaphragm which is sensed by an LVDT circuit. The output from the LVDT is displayed on the indicator.
The Model 2413 DPI Cell is designed to physically separate two media while only contributing 5 part per million uncertainty to the measurement process.
-High performance, low cost
- -Diaphragm isolation provides physical separation between different media
- -Maximum error contribution of 5 PPM
- -Model 2413 is for pressures to 15,000 psi
- -Model 2417 is available for pressures up to 40,000 psi
- -Compatible with virtually any non-corrosive gas or liquid media
- -Time saving tool for cross float calibrations
|
| |
Model 2413 |
| Operating Pressure |
15,000 psi |
| Accuracy |
5 ppm or 0.01 psid, whichever is greater |
| Sensitivity |
Variable from 2 x 10-4 to 0.01 psi per meter unit |
| Over Pressure |
15,000 psi, either side |
| Temperature Range: |
5 to 70 °C |
| Material |
Cell is 400 Series stainless steel |
| Fittings |
¼ in autoclave, female |
| Upper chamber volume |
29.5 cc |
| Lower chamber volume |
0.6 cc |
|
| |
Indicator |
| Type |
Analog meter movement |
| Potentiometers for Zero and Gain Adjust Power |
115/230 VAC, 50/60 Hz |
|
|
|
 |
|
